Chapter 3

Defining Internal Font Settings

1

2

3

4

5

1Extended Characters

Available settings: [Italic], [Graphics]

Default setting: [Graphics]

This parameter determines which characters are used when printing ASCII characters 128 to 255. When [Italic] is selected, italic versions of ASCII characters 32 to 127 are used. When [Graphics] is selected, the characters shown in the table on page 55 are used.

2Character Set Map

Available settings: [USA], [France],

[Germany], [United Kingdom], [Denmark I], [Sweden], [Italy], [Spain I], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]

Default setting: [USA]

This parameter determines which character set is used, allowing you to print special characters appropriate for the language selected. See the table on page 56 for details.

3Default Font

Available settings: [Serif], [Sans Serif]

Default setting: [Serif]

This parameter determines which built-in font is used. A serif font (similar to Courier) and a Sans Serif font (similar to Letter Gothic) are built-in.

4Reduce Character Size

Available settings: [Disable], [Enable]

Default setting: [Disable]

This parameter determines whether text is printed at a reduced size. The actual size of the text depends on the setting selected for [Default Pitch], as shown below.

Default Pitch

Reduced Size

10 characters/inch

16.67 characters/inch

 

 

12 characters/inch

20 characters/inch

 

 

Proportional

Half the character

 

width

 

 

15 characters/inch

Does not change

 

 

5Character Attribute

Available settings: [Bold], [Double Width], [Underline]

This parameter determines the attributes used for printed text.

36