Enter the WEP key you wrote down in step a on page 31. Press OK. Go to step o. (For information how to enter text, see Entering Text on page 154.)
Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step n.
Enter the WPA key you wrote down in step aon page 31 and press OK. Go to step o. (For information how to enter text, see Entering Text on page 154.)
Enter the SSID name. (For information how to enter text, see Entering Text on page 154.) Press OK.

Configuring your machine for a wireless network (Not available for DCP-365CN, DCP-395CN and MFC-295CN)

f (For DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW)

 

When Change to WLAN? or

WLAN Enable? is displayed, press a or 1 accept.

 

This will start the wireless setup wizard.

 

To cancel, press Stop/Exit.

 

 

(For DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW)

 

When Network I/F switched to Wireless is displayed, press OK to accept.

 

This will start the wireless setup wizard.

3

To cancel, press Clear/Back.

 

g The machine will search for your network and display a list of available SSIDs. Choose <New SSID> using a or b.

Press OK.

h

i Using a or b, choose Ad-hocor Infrastructure when instructed. Press OK.

Do one of the following:

If you chose Ad-hoc, go to step k.

If you chose Infrastructure, go to step j.

j Choose the Authentication method using a or b, and press OK. Do one of the following:

If you chose Open System, go to step k. If you chose Shared Key, go to step l.

If you chose WPA/WPA2-PSK, go to step m.

k Choose the Encryption type None or WEP using a or b, and press OK. Do one of the following:

If you chose None, go to step o. If you chose WEP, go to step l.

l

m n

o To apply the settings, choose Yes. To cancel, choose No. Do one of the following:

If you chose Yes, go to step p.

If you chose No, go back to step g.

p The machine starts to connect to the wireless device you have chosen.

32