Configuring your machine for a wireless network (Not available for
q If your wireless device is connected successfully, the display shows Connected for 60 seconds and configuration is completed.
If the connection failed, the display shows Connection Fail or Wrong Password for 60 seconds.
Note
•If the LCD displays Wrong Password, the password you entered did not match with your access point. Verify your network settings collected in step a on page 31, then repeat step b to step o to make sure
you have entered the correct information. | 3 |
•If the LCD displays Connection Fail, make sure your access point is on, and verify your network settings collected in step a on page 31.
Temporarily move your machine as close as possible to the access point, repeat step bto step oto make sure you have entered the correct information.
(See Wireless network troubleshooting on page 136.)
r Press OK.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the
33