Configuring your machine for a wireless network (Not available for
h Enter the SSID name. (For information how to enter text, see Entering Text on page 154.) Press OK.
i Press
If you chose
If you chose Infrastructure, go to step j.
j Choose and press the Authentication method. Do one of the following:
If you chose Open System, go to step k. If you chose Shared Key, go to step l.
If you chose
3
k Choose and press the Encryption type None or WEP. Do one of the following:
If you chose None, go to step o. If you chose WEP, go to step l.
l Enter the WEP key you wrote down in step a on page 36. Press OK. Go to step o. (For information how to enter text, see Entering Text on page 154.)
m
n Enter the WPA key you wrote down in step a on page 36 and press OK. Go to step o. (For information how to enter text, see Entering Text on page 154.)
o To apply the settings, press Yes. To cancel, press No. Do one of the following:
If you chose Yes, go to step p.
If you chose No, go back to step g.
p
q If your wireless device is connected successfully, the display shows Connected for 60 seconds and configuration is completed.
If the connection failed, the display shows Connection Fail or Wrong Password for 60 seconds.
Note
•If the LCD displays Wrong Password, the password you entered did not match with your access point.
Verify your network settings collected in step a on page 36, then repeat step e to step o to make sure you have entered the correct information.
•If the LCD displays Connection Fail, make sure your access point is on, and verify your network settings collected in step a on page 36.
Temporarily move your machine as close as possible to the access point, repeat step eto step oto make sure you have entered the correct information.
(See Wireless network troubleshooting on page 136.)
37