![](/images/new-backgrounds/1306670/30667071x1.webp)
REPEAT PRINTING
The Repeat function allows you to repeatedly print the same label up to nine times.
To use the REPEAT PRINTING function:
It is recommended to set the TAPE FEED mode to “#”, “##” or “###”. (Please refer to page 39.)
(1)Hold down the CODE key and press the REPEAT ( REPEATW ) key.
(2)The following message appears on the display:
A A A A A
1 - 9 ?
CAPS | STL | UNDL/FRM |
(3)Select the number of labels you want. For example, if you want nine labels to be printed, type 9.
(4)Press print.
Press the CODE + FEED keys before cutting the tape if the TAPE FEED mode is set to
Note:
CLEAR
● Press DEL before printing; the previous screen reappears.
●A maximum of nine copies can be printed.
●Cutting is not done automatically.
●Before starting a repeat print, check that there is sufficient tape in the cartridge.
●Never try to cut the tape during printing.
●Press the ON/OFF key immediately if the tape runs out before all the printing is finished. (striped tape will appear.)