S-7200A
4. INSTALLATION
14
(1) 7-pin head detector unit connector
(2) 10-pin operating panel connector
(3) 14-pin encoder connector
(4) 14-pin machine connector
Refer to the following page for the 4-pin
motor connector.
2. Binding the cords
(1) Repeat cable tie
(2) Wire clip
NOTE:
Bind the cords in such a way that the
connector does not get pulled out.
All cords that come out from the
control box should be secured to the
cord holder (3) using the repeat
cable tie (1), otherwise vibration from
the sewing machine may cause the
cords to become disconnected,
which can cause problems with the
operation of the control box.
3131M
Push in securely until
the tabs
(
5
)
en
g
a
g
e.
<Closing the cover>
2110M
<Removal>
<Securing>
Press
the tab.
Cords
3132M