Chapter 10
a Press and hold the 
(Power) button to turn the printer off, and then disconnect the printer from the AC power outlet. If the rechargeable
b Press the cover release lever on either side and lift up to open the RD Roll compartment top cover.
c Using a coin or similar object, slowly turn the time/date battery cover in the direction of the arrow on the battery cover until it stops, and then remove the time/date battery cover.
If the time/date battery cover is forcibly turned past the stop position, it may be damaged.
d Remove the battery.
As shown below, press part A of the battery to release it so that it can easily be removed.
e Install the new battery.
Be sure to insert the new battery with the + and – sides facing the correct direction.
f Return the time/date battery cover to its original position, and then use a coin or similar object to slowly turn the time/date battery cover in the opposite direction of the arrow on the battery cover until it stops in order to install the time/date battery cover.
If the time/date battery cover is forcibly turned past the stop position, it may be damaged.
g Close the RD Roll compartment top cover. Press down until it snaps into place.
NOTE
The time and date can be configured from the [
] (admin key) on the touch panel. For details, see Setting the Time and Date on page 76.
90