Chapter 11

f When the screen for selecting the connection method appears, select [Wireless Network Connection], and then click [Next].

g When the [Firewall/AntiVirus detected] screen appears, select [Change the Firewall port settings to enable network connection and continue with the installation. (Recommended)], and then click [Next].

If you are not using the Windows® Firewall, allow access using UDP ports 137 and 161.

h Use the slider to enable the WLAN interface.

i Make sure that the network cable is not connected to the printer, and then turn on the printer.

Follow the on-screen instructions to check that the printer is in wireless LAN mode.

j Select [Yes, I have a USB cable to use for installation], and then click [Next].

k If the [Important Notice] screen appears, read the notice, select the check box after confirming the SSID and network key, and then click [Next].

96