Chapter 11
q When the screen for the online user registration appears, click [OK] or [Cancel].
If you clicked [OK], you will go to the online user registration page before finishing the installation (recommended).
If you clicked [Cancel], installation continues.
r Click [Finish]. The installation is now complete.
DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.
NOTE
•For Windows Vista®/Windows® 7/Windows® 8 users:
When the [Windows Security] screen appears, select the check box, and then click [Install] to complete the installation correctly.
•Depending on your security settings, a Windows Security or antivirus software window may appear when the printer or its software is being used. Allow or permit the installer to continue.
•When you are asked to restart the computer, click [Restart].
Connecting the Computer and Printer by Wireless LAN
In order for the printer to communicate through the WLAN access point/router, the printer driver and the “Printer Setting Tool” must first be installed, and the WLAN connection settings must be specified. For details, see Installing the Printer Driver and Software on page 4.
a Use the slider to enable the WLAN interface.
b Make sure that the network cable is not connected to the printer, and then turn on the printer.
WLAN communication will start.
NOTE
•The printer’s communication settings can be changed with [Communication settings] in the “Printer Setting Tool”. For details, see Communication Settings
•By using the “Printer Setting Tool”, the communication settings can be changed and easily applied to multiple printers. For details, see Applying Setting Changes to Multiple Printers on page 33.
102