Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)

n Select the printer from the list, and then click [Next].

Installation of the printer driver and software begins.

NOTE

•If wireless setup failed, the [Wireless Device Setup Wizard] screen appears. Follow the on-screen instructions to complete the wireless configuration.

•If WEP is being used as the encryption method and your printer is not found, make sure that you typed in the WEP key correctly.

o The P-touch Update Software can be used to check for updates. When [OK to use P-touch Update Software to update the software to the newest version? (An Internet connection is required to update.)] appears, click [Yes] or [No].

To check for new versions of the software and to update them, click [Yes], and then go to step p.

To not check for new software versions or update them, click [No], and then go to step q.

NOTE

If you click [No] here, you can run the P-touch Update Software at a more convenient time to check for new software versions and update them. Double-click the P-touch Update Software icon on the desktop. (Your computer must be connected to the Internet.)

p The P-touch Update Software starts up.

If an application appears under [File list], there is a new version of the application. If the check box is selected and [Install] is clicked, that application can be installed. Wait until a message appears indicating that the installation has finished.

11

If no application appears under [File list], the application currently installed on the computer is the newest version. There is no need to update. Click [Close].

101