Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)

t The P-touch Update Software starts up.

If an application appears under [File list], there is a new version of the application. If the check box is selected and [Install] is clicked, that application can be installed. Wait until a message appears indicating that the installation has finished.

If no application appears under [File list], the application currently installed on the computer is the newest version. There is no need to update. Click [Close].

u When the screen for the online user registration appears, click [OK] or [Cancel].

If you clicked [OK], you will go to the online user registration page before finishing the installation (recommended).

If you clicked [Cancel], installation continues.

vClick [Finish].

The installation is now complete.

DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

NOTE

•For Windows Vista®/Windows® 7/Windows® 8 users:

When the [Windows Security] screen appears, select the check box, and then click [Install] to complete the installation correctly.

•Depending on your security settings, a Windows Security or antivirus software window may appear when the printer or its software is being used. Allow or permit the installer to continue.

•When you are asked to restart the computer, click [Restart].

One-Push Configuration

Using WPS

If your WLAN access point/router must supports WPS (Wi-Fi Protected Setup™), settings and a connection can be configured easily with the press of a button.

11

a Check that your WLAN access point/router has the WPS symbol.

b Place your printer within range of your WPS access point/router. The range may differ depending on your environment. Refer to the manual for your WLAN access point/router.

99