Use the slider to enable the WLAN interface.

Chapter 11

c

d Make sure that the network cable is not connected to the printer, and then turn on the printer.

e Hold down (at least 5 seconds) the (Feed) button until the STATUS indicator blinks in green.

f Press the WPS button on your WLAN access point/router. When the configuration is complete, the STATUS indicator on the printer lights in green.

Wireless setup is now complete.

Go to step g to install the printer driver and software.

g Insert the installer CD-ROM into your CD-ROM drive. If the language screen appears, choose your language.

NOTE

•For Windows® XP/Windows Vista®/Windows® 7:

If the installer screen does not automatically appear, display the contents of the CD-ROM drive folder, and then double-click [start.exe].

•For Windows® 8:

If the installer screen does not automatically appear, click [Run start.exe] in the [Start] screen, or display the contents of the CD-ROM drive folder from the desktop, and then double-click [start.exe].

h Click [Standard Installation].

i Read the license agreement, and click [Agree] if you agree with the terms and conditions.

j Click [Install] to start the installation, and then follow the on-screen instructions.

k When the following screen appears, select [Wireless Network Connection], and then click [Next].

l When the [Firewall/AntiVirus detected] screen appears, select [Change the Firewall port settings to enable network connection and continue with the installation. (Recommended)], and then click [Next].

If you are not using the Windows® Firewall, allow access using UDP ports 137 and 161.

m Follow the on-screen instructions to check that the printer is in wireless LAN mode.

100