Chapter 11

p Confirm the wireless network settings, and then click [Next]. The settings will be sent to your printer.

NOTE

•The settings will remain unchanged if you click [Cancel].

•If you want to manually assign an IP address to the printer, click [Change IP Address], and then type in the IP address.

•If the wireless setup failure screen appears, click [Retry].

q Disconnect the USB cable connecting the computer and the printer, and then click [Next].

Wireless setup is now complete.

Go to step r to install the printer driver and software.

r Select the printer from the list, and then click [Next].

Installation of the printer driver and software begins.

NOTE

•If wireless setup failed, the [Wireless Device Setup Wizard] screen appears. Follow the on-screen instructions to complete the wireless configuration.

•If WEP is being used as the encryption method and your printer is not found, make sure that you typed in the WEP key correctly.

s The P-touch Update Software can be used to check for updates. When [OK to use P-touch Update Software to update the software to the newest version? (An Internet connection is required to update.)] appears, click [Yes] or [No].

To check for new versions of the software and to update them, click [Yes], and then go to step t.

To not check for new software versions or update them, click [No], and then go to step u.

NOTE

If you click [No] here, you can run the P-touch Update Software at a more convenient time to check for new software versions and update them. Double-click the P-touch Update Software icon on the desktop. (Your computer must be connected to the Internet.)

98