11 Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)

Installing the Printer Driver and Software

The printer driver and software can be installed using any of the following three method.

USB cable connection

Wired LAN connection (TD-2120N/2130N only)

Wireless LAN connection (TD-2120N/2130N only) (if the WLAN interface is attached)

The following describes the procedure for making a wireless LAN connection.

Before specifying settings, see Installing the Printer Driver and Software on page 4 and Installer Screen on page 5.

To make a USB cable connection or wired LAN connection, see USB Cable Connection on page 5 and Wired LAN Connection (TD-2120N/2130N only) on page 7.

Before Making a Wireless LAN Connection

Required Devices and Network

Configuration

This section provides a description of the procedure for making a connection in the following network configuration (infrastructure mode).

Infrastructure mode

5

1

4 2

3

1WLAN access point/router

2This printer

3Wireless-capable computer connected to the access point/router

4 Wired computer

11

connected to the access point/router

 

5 Mobile phone, such as a smartphone

In order to use a wireless LAN connection, the WLAN interface (optional) must be attached to the printer. For details on attaching the WLAN interface (optional), see its instruction manual.

Before making a wireless LAN connection, make sure that the network cable is not connected to the printer.

93