Brother TN 460, TN 430 manual W. unineti m a g i n g . c o m / t e c h n i c a l . a s p

UNINETIMAGINGINC.INC• BROTHER. • BROTHERHL 1240/1651240/1650(TN 430/460)• DISASSEMBLINGCARTRIDGE REMANUFACTHE TONERURING INSTRUCTIONSCARTRIDGE

4.With a small flat blade screwdriver, pry the bearing cap off the developer roller axle and the fixing post.

5.Move to the other side of the cartridge and above the white plastic hub on the gear side, locate the clip that holds the devel- oper roller cap-bearing. NOTE: Contrary to the other bearing cap this one is located between the developer roller and the side of the cartridge.

NOTES

6.Press the clip in towards the developer roller and rotate the piece up towards the front of the toner hopper, until the bearing cap is perpendicular to the roller.

w w w. unineti m a g i n g . c o m / t e c h n i c a l . a s p

11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com

© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.