UTILITY STITCHES —————————————————————————————————————————————————
—
40
ZIPPER INSERTION
You can use the zipper foot to sew different types of zippers, and can easily position it to the right or left side of
the needle.
When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot. When sewing the left
side of the zipper, attach the shank to the right pin of the zipper foot.
*Rev.: Reverse **Do not use reverse stitching.
aZipper foot
bRight pin for sewing the left side of the zipper
cLeft pin for sewing the right side of the zipper
aSelect stitch .
bLower the presser foot lever and fix either the
left or right pin of the zipper foot onto the
shank.
cFold the edge of the material 2 cm (3/4 inch)
and place the zipper under the folded section.
Lower the needle into the notch located either
on the left or right side of the zipper foot.
dSew from the bottom of the zipper toward the
top on both sides. The needle should be
positioned on the zipper side of the foot for
best results.
eTo sew the opposite side of the zipper, release
the foot by pressing the button located at the
back of the presser foot, fit the zipper foot on
the other side of the zipper and continue
sewing using the other side notch.
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch.)] Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse/
Reinforcement
Stitching
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto Manual Auto Manual
Straight
stitch
(center) I 01010101
Attaching zippers, basic
stitching, and sewing
gathers or pintucks, etc. ––
2.5
(3/32) 0.2–5.0
(1/64–3/16) Yes
( J ) Yes Rev.
●Turn the handwheel by hand to mak e sure the
needle does not hit the presser foot b efore
you start sewing. If you choose a different
stitch, the needle will hit the presser foot and
break the needle. You may also be injured.
12
3
CAUTION ●Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper,
the needle may break and you may be i njured.
CAUTION
*
**