APPENDIX ————————————————————————————————————————————————————
—
58
eRemove the bobbin case.
Grasp the bobbin case, and then pull it out.
aBobbin case
fUse the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.
aCleaning brush
bRace
• Do not put oil on the bobbin case.
gInsert the bobbin case so that the projection
on the bobbin case aligns with the spring.
aProjection
bSpring
hPut the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
1
2
1
12
●Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XC3152-021), contact your
nearest authorized service center.
●Make sure that you fit the bobbin case
properly, otherwise the needle may break.
CAUTION