OtN Series 2000

Gearmotors and Reducers

Series 2000 OtN gearing is shipped with one of the following synthetic lubricants per the table below and fitted with a magnetic drain. Each reducer is filled according to the mounting position specified when ordered. Refer to unit nameplate and the chart to the left for mounting position arrangement for your unit.

In the case of synthetic oil, the lubricant does not require changing but it is recommended that proper oil level be checked periodically.

Standard Synthetic Gear Oil

No Backstop

Manufacturer

-25° F to 125° F

(-30° C to 50° C)

 

Fuchs®

Sintogear® 125

Mobil®

SHC 629

Shell®

Omala® Fluids HD 150

With Backstop

Manufacturer

-25° F to 125° F

(-30° C to 50° C)

 

Shell

Omala RL 100

CAUTION: Never mix synthetic oil and mineral oil. Never use extreme pressure (EP) oil in a reducer with a backstop.

Acceptable Mineral Oil Lubricants

Ambient Range of Installation

-4°F to 14°F

 

 

14°F to 122°F (-10°C to 50°C)

 

122°F and Above

(-20°C to 10°C)

 

 

No Backstop

 

 

 

 

With Backstop

(50°C +)

ISO VG 68

 

ISO VG 100

ISO VG 150

 

 

ISO VG 220

ISO VG 150

ISO VG 320

 

Triple Reduction

 

 

 

 

 

 

 

 

 

 

Primary

 

 

 

 

 

 

Combined

Reduction

 

 

 

 

Combined

Reduction

 

 

Primary

 

 

 

 

 

 

 

 

 

 

 

 

Secondary

 

 

 

 

Triple Reduction and Combined (U.S. Quarts)

Gear

 

 

 

 

 

 

Mounting Positions

 

 

 

 

 

 

 

 

 

Frame

B

 

 

P

 

H

 

T

V

 

 

W

 

Size

Prim.

 

Sec.

Prim.

 

Sec.

Prim.

 

Sec.

Prim.

 

Sec.

Prim.

 

Sec.

Prim.

 

Sec.

 

2203

0.40

 

1.80

 

1.50

 

1.30

 

1.60

 

1.10

 

2303/2305

1.00

 

0.40

5.00

 

0.40

5.50

 

0.40

5.50

 

0.40

6.00

 

1.26

3.50

 

1.17

 

2306

1.00

 

0.27

5.00

 

0.27

5.50

 

0.27

5.50

 

0.27

6.00

 

1.16

3.50

 

1.15

 

2403/2405

1.50

 

0.40

9.00

 

0.40

9.00

 

0.40

9.60

 

0.40

10.00

 

1.28

5.50

 

1.17

 

2406

1.50

 

0.27

9.00

 

0.24

9.00

 

0.27

9.60

 

0.27

10.00

 

1.16

5.50

 

1.15

 

2503/2505

3.00

 

0.40

17.00

 

0.40

19.00

 

0.40

18.00

 

0.40

20.00

 

1.26

11.50

 

1.17

 

2506

3.00

 

0.27

17.00

 

0.27

19.00

 

0.27

20.00

 

0.27

20.00

 

1.16

11.50

 

1.15

 

2603/2605

4.50

 

0.54

28.50

 

0.54

28.50

 

0.54

28.50

 

0.54

30.0

 

2.11

16.00

 

1.84

 

2606

4.50

 

0.50

28.50

 

0.50

28.50

 

0.50

28.50

 

0.50

30.0

 

2.00

16.00

 

1.80

 

2703/2705

6.00

 

1.67

39.00

 

1.67

37.00

 

1.67

40.00

 

1.67

42.0

 

4.40

21.00

 

4.40

 

2706

6.00

 

1.50

39.00

 

1.50

37.00

 

1.50

40.00

 

1.50

42.0

 

4.54

21.00

 

4.44

 

2803/2805

11.50

 

2.60

78.00

 

2.60

76.00

 

2.60

82.50

 

2.50

83.0

 

8.30

72.50

 

8.00

 

2806

11.50

 

2.30

76.00

 

2.30

76.00

 

2.30

82.50

 

2.30

83.0

 

8.00

72.50

 

7.80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The trade names, trademarks and/or registered trademarks that follow are used in this material by Emerson Power Transmission Corporation for comparison purposes, are NOT owned or controlled by Emerson Power Transmission Corporation and are believed to be owned by the parties identified: Fuchs and Sintogear: Fuchs Corporation; Shell and Omala: Shell Petroleum Incorporated; Mobil: Exxonmobil Oil Corporation.

Emerson Power Transmission Corporation cannot and does not represent or warrant the accuracy of this information.

4

Page 4
Image 4
Browning OtN Series 2000 manual Triple Reduction and Combined U.S. Quarts, Standard Synthetic Gear Oil