OtN Series 2000
Gearmotors and Reducers
One-Piece Splined Coupling (Type UE and U)
A
56C, 140TC
MOTOR
A
"O" RING
180TC - 280TC
MOTOR
Notes:
1.Install motor shaft key onto motor shaft.
2.Lubricate spline teeth of coupling and input shaft with Mobil grease XTC or equivalent coupling grease.
3.Install coupling onto motor shaft and set to the specified distance.
Refer to table below (dimension "A") for correct setting distances.
4.Apply thread locking compound to set screw and install. Tighten into coupling.
5.Assemble motor to gear reducer engaging splined coupling and bolt the motor to the
Input | Reducer Size | Motor | A | |
| ||||
Type | OtN | Size | (Inches) | |
|
|
| ||
|
|
|
| |
UE | 22, 23 | 56C, 140TC | 3.06 | |
|
| |||
180TC, 210TC | 4.04 | |||
|
| |||
|
|
|
| |
|
| 56C, 140TC | 3.12 | |
|
|
|
| |
UE | 24, 25 | 180TC, 210TC | 4.11 | |
|
| |||
250TC | 4.75 | |||
|
| |||
|
|
|
| |
|
| 280TC | 5.64 | |
|
|
|
| |
|
| 140TC | 3.86 | |
|
|
|
| |
U | 26 | 180TC, 210TC | 5.34 | |
|
| |||
250TC | 5.34 | |||
|
| |||
|
|
|
| |
|
| 280TC | 6.31 | |
|
|
|
|
5
