ROGER 18 Series

OPERATING YOUR RADIO

POWER ON/OFF AND VOLUME

Rotate the POWER/VOLUME knob clockwise to turn the radio on and increase the volume level. Rotate the control counter-clockwise to reduce the volume level and to turn the radio off. During Power On, the radio will beep 2 times with different tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected.

TRANSMITTING AND RECEIVING A CALL

To communicate, all radios in your group must be set to the same channel and Privacy Code.

1.For maximum clarity, hold the radio 2 to 3 inches from your mouth.

2.Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting.

3.To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission.

ABOUT RANGE

Your ROGER 18 Series radios are designed to give you maximum range under optimum conditions.

Optimum Conditions are:

LOver water

LOpen rural areas without obstructions

LFlat areas where you can see the other person

To ensure you get maximum range:

LBe sure to use fresh or fully charged batteries - low batteries will cause low power conditions

LBe sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power

LBe sure to set your radio to use Hi power.

Page 8

 

www.brunton.com

Page 8
Image 8
Brunton ROGER 18 SERIES Operating Your Radio, Power ON/OFF and Volume, Transmitting and Receiving a Call, About Range