Page 9 www.brunton.com
ROGER 18 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your ROGER 18 Series can scan all 22 channels for
activity. To enter, quickly press the SCAN button. Repeat the same
procedure to exit. Your radio will rapidly scan each of the 22 channels
and stop on any active channel. Your radio will resume scanning after
4 seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the button.
CALL ALERT
Your ROGER 18 Series can transmit a call alert for a fixed
length of time. To send a call alert, press the CALL button. The TX
icon will appear while transmitting a call alert and a tone can be heard
on the speaker for confirmation.
The ROGER 18 has 5 call alert selections while the ROGER 18 CAMO
has 10 call alerts including 5 “animal sound” call alerts - duck,
goose, turkey, owl and elk.
ROGER 18 Series
MENU Channel VOX
1~22
Privacy Roger beep
On/Off
Power
H/M/L
Call Alert
1~5
Vibrate
On/Off
WX Channel
1~10
Press &
hold Menu
button
Silent Operation
On/Off
oF/1/2/3
Off
CTCSS
DCS
1~38
1~83
WX Alert
On/Off
1~10for ROGER 18 CAMO
/