|
| Testing Machine and Electronic Control Functions |
|
| |
| Production Test Cycle Quick Reference Chart | |
|
|
|
Display | Test Cycle Step | Comments |
|
|
|
“S xx” | FEC Control Software | xx is the software version number. |
| Version |
|
|
|
|
“o xx” | Output Board Software | xx is the software version number. |
| Version |
|
|
|
|
“Ct 3” | Control Type | xx is the control type. |
|
|
|
“oPL” | Control Type | OPL. |
|
|
|
“USA” | Control Type | Domestic |
|
|
|
“drAn” or “PUnP” | Drain Type | Drain or Pump. |
|
|
|
“tEnP” | Temp Sensor | Step skipped if not Temperature |
|
|
|
“HEAt” | Heater | Step skipped if not |
|
|
|
“rot” | Rotation Sensor | Step skipped if not Rotation |
|
|
|
“L dC” or “L AC” | Door Lock Type | “L dC” if 24 VDC lock or “L AC” if 240 VAC unlock solenoid. |
|
|
|
“droP” or “drCL” | Door Status | Door open or closed. |
|
|
|
“drUL” or “drLo” | Door Lock Status | Door will lock. |
|
|
|
“8.8.8.8.” + all LEDs | Display Test | All display elements are lit. |
|
|
|
“PAxx” where xx = 1 | Keypad Test step | Advance after all keypads are pressed. |
through 12 |
|
|
|
|
|
“A xx” | Access Panel Switch Test | xx is either “CL” for closed or “oP” for open. |
|
|
|
“Cxxx” or “Pxxx” | Machine Type/Size |
|
|
|
|
“HFIL” | Hot Fill to Low Level | All water turned off when Low Level reached. |
|
|
|
“CFIL” | Cold Fill to Low Level | All water turned off when Low Level reached. |
|
|
|
“bFIL” | Warm Fill to Low Level | All water turned off when Low Level reached. |
|
|
|
“bFIH” | Warm Fill to High Level | All water turned off when High Level reached. |
|
|
|
“S1” for supply or | Supply #1 or Compartment |
|
“C2Co” for compartment | #2 Cold Fill |
|
“S2” for supply or | Supply #2 or Compartment |
|
“C2Ho” for compartment | #2 Hot Fill |
|
“S3” for supply or | Supply #3 or Compartment |
|
“C3Co” for compartment | #3 Cold Fill |
|
“S4” for supply or | Supply #4 or Compartment |
|
“C4Ho” for compartment | #4 Hot Fill |
|
“oFLo” | Warm Fill to Overflow |
|
|
|
|
“xxxF” degrees F or | Heat water to 110°F or | xxx is degree temperature. This step skipped if not |
“xxxC” degrees C | display temperature | equipped. Heater turned off when temperature reached. |
depending on the |
|
|
Fahrenheit/Celsius |
|
|
programming parameter |
|
|
|
|
|
| Table 15 (continued) | |
F8208801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 49 |
