Alliance Laundry Systems PHM1263R FLEn, TEnP, CoLd/Uarn/Hotor, SUEn, Disp, SdUr, NIn, AgEn, AdUr

Programming Control

Table 1 (continued)

Option	Option	Description	Default	Value Range
Number	Display		Value
c.	“FILL”	Fill Step	—	—
1.	“FLEn”	Fill Step Enable/Disable	**	“on”/“oFF”
2.	“FLEU”	Fill Level	**	“HI”/“nEd”/“Lo” or 1-30
3.	“tEnP”	Fill Temperature	**	“CoLd”/“Uarn”/“Hot”or
				35°F-194°F/2°C-90°C
d.	“SUPL”	Supply Step	—	—
1.	“SUEn”	Supply Step Enable/Disable	**	“on”/“oFF”
2.	“dISP”	Dispenser Options	**	Display will show “Sx”
3.	“S1”	Supply #1	**	“on”/“oFF”
4.	“S2”	Supply #2	**	“on”/“oFF”
5.	“S3”	Supply #3	**	“on”/“oFF”
6.	“S4”	Supply #4	**	“on”/“oFF”
7.	“SdUr”	Supply Duration	**	Press START keypad to access
				options
8.	“SEC”	Seconds	**	0-59
9.	“nIn”	Minutes	**	0-9
e.	“AgSt”	Agitate Step	—	—
1.	“AgEn”	Agitate Step Enable/Disable	**	“on”/“oFF”
2.	“AdUr”	Agitate Duration (in minutes)	**	1-30 for agitate types 1 or 2;
				1-180 for agitate types 3 or 4
3.	“HEAt”	Heat in Agitate (if heater is present)	“oFF” (Rinse)	“oFF”/“1”/“2”**
			“2” (Wash)
f.	“drAn”	Drain Step	—	“on”/“oFF”
g.	“SPIn”	Spin Stop	—	—
1.	“SPEn”	Extract Step Enable/Disable	**	“on”/“oFF”
2.	“SSEC”	Extract Seconds	**	0-59
3.	“SnIn”	Extract Minutes	**	Intermediate Extract:
				Min. Step Time = 30 seconds,
				Max. Step Time = 3:59 minutes
				Final Extract:
				Min. Step Time = 30 seconds,
				Max. Step Time = 9:59 minutes
4.	“SSPd”	Extract Speed (VFD only)	**	“1”-“3”*
h.	“Cnin”***	Cycle Time in Minutes (If PCtd is enabled)	0	0-255minutes
5	“bALr”	Number of Balance Retries (VFD only)	3	1-7
6	“IrA”	IR Access (On/Off)	“on”	“on”/“oFF”
7	“t FC”	Fahrenheit/Celsius	“FAHr”	“FAHr” (Fahrenheit)/“CEL”
			(Fahrenheit)	(Celsius)
8	“FH”	Hot Water Temperature	140°F (60°C)	35°F-194°F/2°C-90°C
9	“FHC”	Warm Water Temperature	100°F (38°C)	35°F-194°F/2°C-90°C
10	“FC”	Cold Water Temperature	35°F (2°C)	35°F-194°F/2°C-90°C
		Table 1 (continued)

12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208801