17. Set Real-Time Clock “rtC-”’
This option allows the owner to set the control’s internal clock to the correct time and date.
How to Program the Time and Date
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until
4.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options. Refer to Figure 10.
“rtC1” | Programs Minutes |
|
|
“rtC2” | Programs Hours |
|
|
“rtC3” | Programs Day of Week |
|
|
“rtC4” | Programs Date of Month |
|
|
“rtC5” | Programs Month |
|
|
“rtC6” | Programs Year |
|
|
“rtC7” | Programs Daylight Saving |
|
|
| Table 10 |
5.When the desired option appears in the display, press the START (enter) keypad. The current value will appear in the display.
6.Press the #3 (>) or the #6 (<) keypad to increase or decrease the minutes, hours, day of week, date of the month, month, year to the correct time or date.
Programming Control
NOTE: The hours will be displayed in military time. For day of week, Sunday is considered day one (001), Monday is day two (002) and so on. For year, the year 2000 is “00”, the year 2001 is “01” and so on.
If programming Daylight Saving, “rtc7”, “on” enables Daylight Saving Time and “oFF” disables Daylight Saving Time.
7.Press the START (enter) keypad when the correct time or date appears in the display. The next Set
NOTE: To program “dAEn” (Manual Diagnostics [on/off]), press the #5 (<) keypad and refer to option 18. To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
F8208801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 37 |
