10. Cold Water Temperature “FC”
This option allows the owner to program the cold water temperature for models equipped with temperature sensing capabilities.
How to Program Cold Water Temperature
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “FC” appears in the display.
4.When “FC” appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current Cold Water Temperature value.
5.Press the #3 (>) or the #6 (<) keypad to increase or decrease the current Cold Water Temperature value to the desired Cold Water Temperature value.
NOTE: Cold Water Temperature is selectable between 35° and 194° Fahrenheit (2° and 90° Celsius). Default temperature value is 35° Fahrenheit (2° Celsius).
NOTE: Refer to option 7 to select Celsius or Fahrenheit display.
6.Press the START (enter) keypad when the correct number appears in the display. The next option, “Codn”, will appear in the display.
NOTE: To program “Codn” (Cooldown Enable/ Temperature), refer to option 11. To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
Programming Control
11.Cooldown Enable/Temperature “Codn”
This option allows the owner to enable or disable the Cooldown Water Temperature option. If enabled, the owner can also set the cooldown water temperature.
How to Program Cooldown Enable/ Temperature
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “Codn” appears in the display.
4.When “Codn” appears in the display, press the START (enter) keypad. A number or “off” will appear in the display. The number corresponds to the current Cooldown Water Temperature value, and “oFF” appears when cooldown is disabled.
5.Press the #3 (>) or the #6 (<) keypad to change the current status.
NOTE: Cooldown Water Temperature is selectable between 50° and 160° Fahrenheit (10° and 71° Celsius). Default is off.
6.Press the START (enter) keypad when the desired value appears in the display.
NOTE: Refer to option 7 to select Celsius or Fahrenheit display.
7.Press the START (enter) keypad when the correct number appears in the display. The next option, “PtEn”, will appear in the display.
NOTE: To program “PtEn” (Production Test Cycle [on/off]), refer to option 12. To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
F8208801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 33 |
