Programming Control
18.Manual Diagnostics (On/Off) “dAEn”
This option allows the owner to enable or disable the manual diagnostics option. Refer to Testing Machine and Electronic Control Functions section for more information.
How to Program the Manual Diagnostics (On/Off)
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “dAEn” appears in the display.
4.When “dAEn” appears in the display, press the START (enter) keypad. The current Manual Diagnostics status will appear in the display. “on” = Option Enabled
“oFF” = Option Disabled
5.Press the #3 (>) or the #6 (<) keypad to change the current status.
6.Press the START (enter) keypad when the desired status appears in the display. The next option, “FLo”, will appear in the display.
NOTE: To program “FLo” (Low Water Level), refer to option 19. To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
19. Low Water Level “FLo”
This option allows the owner to program the low water level during fill and tumble of all cycles.
How to Program Low Water Level
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “FLo” appears in the display.
4.When “FLo” appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current low water level during tumble and fill of all cycles.
5.Press the #3 (>) or the #6 (<) keypad to increase or decrease the current water level to the desired water level.
NOTE: The Low Water Level value can be set from 1 to 10.
6.Press the START (enter) keypad when the correct number appears in the display. The next option, “FnEd”, will appear in the display.
NOTE: To program “FnEd” (Medium Water Level), refer to option 20. To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
38 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F8208801 |
