Manual Reset

This feature allows the owner to reset the washer- extractor control’s programming data to the factory default settings by pressing a sequence of pads on the control. For an explanation of the Factory Default Settings, refer to Default Washer Settings.

How to Enter Manual Reset

1.Control must be in Manual Mode to start. Refer to Entering the Manual Mode.

2.Press the #3 (>) or the #6 (<) keypad until “rSEt” appears.

3.Press the START (enter) keypad. The control will be blank until the programming is complete. Once the program has been reset, the control will display the next Manual Mode option, “dIAg”.

F8208801

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

43

Page 45
Image 45
Alliance Laundry Systems PHM1263R manual How to Enter Manual Reset