Programming Control
Manual Programming Flowchart (2 of 3)
(continued)
(continued)
(continued)
“SUPL” - Program supply step options
“AgSt” - Program agitate step options
“drAn” - Enable/disable drain step
“SPIn” - Program extract step options
“Cnin” * - Programmable
Cycle Time Display
in Minutes: "0" - "255"
“SUEn” - Supply Step Enable/Disable:
“on” = Enabled
“oFF” = Disabled
“dISP” Dispenser Options:
Press START (enter) to access options
“SdUr” Supply Duration:
Press START (enter) to access options
“AgEn” - Agitate Step
Enabled/Disabled:
“on” = Enabled
“oFF” = Disabled
“AdUr” - Agitate Duration (min):
“1” - “30” (for agitation types 1 or 2) or “1” - “180” for agitation types 3 or 4
“HEAt” - Heat in Agitate
(heat present only):
“oFF” = Disabled
“1” = To Target “2” = Maintain
Drain Step:
“on” = Enabled
“oFF” = Disabled
“SPEn” - Extract Step
Enabled/Disabled:
“on” = Enabled
“oFF” = Disabled
“SSEC” - Extract Seconds:
“0” - “59”
“SnIn” - Extract Minutes:
“30” - “3.59”: Intermediate Step
“30” - “9:59”: Final Step
“SSPd” Extract Speed (VFD only): 1 = Very Low Speed (60g)
2 = Low Speed
(L - Speed = 100g;
M - Speed = 120g) 3 = Medium Speed
(L - Speed = 100g;
M - Speed = 180g)
“S1” -
Supply #1:
“on” = Enabled
“oFF” = Disabled
“S2” -
Supply #2:
“on” = Enabled
“oFF” = Disabled
“S3” -
Supply #3:
“on” = Enabled
“oFF” = Disabled
“S4” - Supply #4:
“on” = Enabled
“oFF” = Disabled
“SEC” - Seconds:
“0” - “59”
“nIn” - Minutes:
“0” - “9”
* Option available on software version 2 only. | PHM1402R |
PHM1402R
Figure 4
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F8208801 |
