Alliance Laundry Systems PHM1263R manual Production Test Cycle On/Off PtEn

Programming Control

12.Production Test Cycle (On/Off) “PtEn”

This option allows the owner to enable or disable access to the production test cycle. Refer to Production Test Cycle section for more information.

How to Program the Production Test Cycle (On/Off)

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the #3 (>) or the #6 (<) keypad until

“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.

3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “PtEn” appears in the display.

4.When “PtEn” appears in the display, press the START (enter) keypad. The current Production Test Cycle status will appear in the display.

“on” = Option Enabled “oFF” = Option Disabled

5.Press the #3 (>) or the #6 (<) keypad to change the current status.

6.Press the START (enter) keypad when the desired status appears in the display. The next option, “rAEn”, will appear in the display.

NOTE: To program “rAEn” (Manual Rapid Advance [on/off]), refer to option 13. To program other options, refer to the appropriate section.

How to Exit Programming Feature

Press the #5 (<) keypad until the control returns to Start Mode.

13.Manual Rapid Advance (On/Off) “rAEn”

This option allows the owner to enable or disable the rapid advance feature. Refer to Rapid Advance Feature section for more information.

How to Program the Manual Rapid Advance (On/Off)

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the #3 (>) or the #6 (<) keypad until

“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.

3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “rAEn” appears in the display.

4.When “rAEn” appears in the display, press the START (enter) keypad. The current Manual Rapid Advance status will appear in the display. “on” = Option Enabled

“oFF” = Option Disabled

5.Press the #3 (>) or the #6 (<) keypad to change the current status.

6.Press the START (enter) keypad when the desired status appears in the display. The next option, “rtc-”, will appear in the display.

NOTE: To program “nCtd” (No Cycle Time Display), refer to option 14. To program other options, refer to the appropriate section.

How to Exit Programming Feature

Press the #5 (<) keypad until the control returns to Start Mode.

34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208801