1.Default Cycle “dCYC”
This option allows the owner to set the default cycle the machine will enter when in the Ready Mode.
How to Program Default Cycle
1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the #3 (>) or the #6 (<) keypad until
“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.
3.When “dCYC” appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current default cycle value.
NOTE: The default cycle can be set from 1 to 30.
Programming Control
4.Press the #3 (>) or the #6 (<) keypad to increase or decrease the current number to the desired number.
5.Press the START (enter) keypad when the correct number appears in the display. The next option, “AUd”, will appear in the display.
NOTE: To program “AUd” (Audio Signal), refer to option 2 To program other options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to Start Mode.
F8208801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 19 |
