Pioneer 12 technical manual Special Installation Embedding in the wall, Viewed from Above

Special Installation (Embedding in the wall)

3.4.3 Embedding in the wall

Carefully read the following imformation before trying to embed the unit in a wall. Observe all the limitations specified below.

Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.

(1)Embedding in walls with space provided behind the unit (no obstructions within a distance of 300 mm from the back surface of the unit).

A

A

X (Front of the unit)

Y (Rear of the unit) A

<Viewed from Above>

✩Operating Temperature Restrictions

	Temperature in space X and Y
A: 0 mm to 370 mm	0 °C to 40 °C

* The same operating temperature restrictions apply to the speaker system (PDP-S55-LR).

A

<Viewed from the Right Side>

Methods of Securing: Basic methods of securing are shown below. Avoid blocking or covering areas aside from those

indicated by .

Before attaching the unit to fittings, double-check that the thickness and height of the fittings, and the number of bolts is correct.

(Also refer to “3.4.1 Mounting to fittings” (pg. 24).)

28