INPUT3 | Pioneer 12 instruction

Video Card: PDA-5003/PDA-5004

[When using PDA-5003]		[When using PDA-5004]
Audio connection for component connected to		Audio connection for component connected to
INPUT3 or INPUT4		INPUT3
INPUT 3/4	AUDIO
		INPUT3	AUDIO
			AUDIO
R	L
			R L

Audio input to the AUDIO R/L (INPUT3/4) pin jacks is possible for a component connected to either INPUT3 or INPUT4.

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

The audio line for the component connected to INPUT3 can be connected to the AUDIO R/L (INPUT3) pin jacks.

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

Audio connection for component connected to

INPUT4

INPUT4AUDIO

R L

The audio line for the component connected to INPUT4 can be connected to the AUDIO R/L (INPUT4) pin jacks.

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

61

Image 61

Pioneer 12 technical manual INPUT3

Contents

To use this product safely Technical Manual Ver Table of Contents Table of Contents RGB signals from AV devices other than PCs PrecautionsIntroduction Input Features and Functions of this device Specifications PC signals supported Input Response SignalsRefresh rate Dot x Line Vertical External Dimensions Main Unit Operation Panel Light Sensor for the remote/ambient light Sensor/indicatorConnection panel Main unit Operation panel on the main unit Controls and ConnectorsMain unit Plasma Display Section 567 Video Card PDA-5004 Section Video Card PDA-5003 Section INPUT2 DVI-D 24 pin connector female Pin layout INPUT1 Mini D-sub, 15-pin connector female Pin layoutPin layout Combination IN/OUT terminal pin layout Remote Control Unit Safety Precautions Installation Site Requirements Power requirements Temperature and humidity conditionsEffective remote control distance Prevent condensation Heat dissipation Installation Conditions Calculating heat quantity Rear view diagram Side view diagramProduct mounting holes Methods of securing Mounting surface warping Transportation precautions Installation ProceduresUnpacking Ref. No Terms Wiring Using pliers, twist the clamp 90 and pull outward Organize cables together using the provided speed clampsTo attach the speed clamps to the main unit To remove speed clamps Operating environment for standard installation Special Installation Mounting to fittingsAmbient Temperature 0 C to 40 C examples 1 Operating environment for vertical installation *1 Vertical installation Example Special Instruction Hanging on the wall Requirements when used with PDP-S55-LR speaker systemHanging on the wall Flush-wall installation Special Installation Hanging on the wallWall-mounted installation Wall-embedded installation Operating Temperature Restrictions Special Installation Embedding in the wallEmbedding in the wall Viewed from Above Thermometer temperature measurement point Embedding in walls with no space provided behind the unit When the display is put in a box Special installation When the display is put in a boxUsage temperature conditions BOX air temperature Ambient temperature 0 C to 35 C Ceiling suspension with wires Special Installation Ceiling suspension with wiresAmbient Temperature 0 C to 40 C Special Installation Ceiling suspension with wires Operating Temperature Restrictions *1 Special Installation Hanging on the wall lengthwiseHanging on the wall lengthwise Installation is not possible Viewed from Above Viewed from the Right Side Temperature in space X and Y Mm to 370 mmPage Embedding in walls with no space provided behind the unit Page Installed facing upward Special Installation Installed facing upwardHorizontal surface Operating Temperature Restrictions *1 Usage temperature conditions *1 Horizontal connections Special installation Horizontal connectionsMm or more To 40 C Multiple Special installation MultipleMm to 300 mm or less To 35 C Mm or more To 40 C ¶ Video Card PDA-5003/PDA-5004 Standard Mounting Components Features and Characteristics¶ Table Top Stand PDK-TS26 ¶ Wall Mount Unit PDK-WM03 Precautions for installation contractors Handling precautionsHandling the Standard Mounting Components Video Card PDA-5003/PDA-5004 Specifications PDA-5004 Video-related Accessories PDA-5003 External DimensionsPDA-5004 Connection panel when equipped with PDA-5004 Connection panel when equipped with PDA-5003 Installation Notes Installing proceduresInstallation Impedance selector switch is found only on the PDA Holding the inside tabs, pull the video card straight out Remove the two screws holding the video card When using PDA-5003 Input connectors on the Plasma Display with video cardWhen using PDA-5004 Connection to INPUT1 and INPUT5 On-screen setup is necessary after connection When connecting to Analog RGB in INPUT1When connecting to Analog RGB INPUT5 When connecting to Component Video INPUT5 Connection of G on Sync analog RGB source Connection of separate Sync analog RGB Source Connection of composite Sync analog RGB Source To an external monitor When connecting to Analog RGB OUT INPUT1 INPUT1 Connection to INPUT3 Connection to INPUT2Connection to INPUT4 Computer or AV component Signal type Signal format Video Video signalAbout DTV set top box connection Audio connection for component connected to Audio connectionsAudio connections for component connected to INPUT3 Input 1 Signal Format Remark Vertical Horizontal Signal Remark Applies only when equipped with PDA-5003/PDA-5004 Table Top Stand PDK-TS26 Package dimensionsOther factors External Dimensions When using Plasma Display Stand assembling Attaching the Stand to the Plasma Display Components Wall Mount Unit PDK-WM03Attachment Restrictions Center of the display Installing the hung on wall unit on the wall Hardware assembly and Plasma Display attachmentAttaching the metal fittings Installing the Plasma Display Speaker System PDP-S55-LR External Dimensions when mounted to the Plasma Display Installation procedure Installation on the Plasma DisplayInstall the speaker system according to the steps 1 through Speaker System PDP-S55-LR Care and Maintenance When the cabinet gets dirty Speaker System PDP-S55-LR Operation Mode Before Beginning Adjustment Before Beginning Adjustments Input correspondence signals personal computer signals List of Input Correspondence Signals Resolution Refresh rate Not available Screen size Screen size Personal computer signalDOT by DOT Full INPUT1, INPUT5 Screen size Signal Format Signal Format Screen size Remark 640x480 59.9 Hz 31.5 kHz INPUT2 Refresh rate Screen size Dot x line When a video card is installed Personal computer Screen size Menu Mode PDP-607CMX List of Adjustable and Settable Items Before Beginning Adjustments PDA-5003/PDA-5004 Slot card other than PDA-5003/PDA-5004 Integrator mode PDP-607CMX Applicable only when a PDA-5003/PDA-5004 is installed PDA-5003/PDA-5004 Slot card other than PDA-5003/PDA-5004 Aging Last MemorySaving to Memory About normal operation mode Normal Operating Mode Normal Operation Mode149 351 Side-by-side OFF Picture-in-picture Normal Operating ModeLower right Upper right Lower left About menu mode Menu ModeConcerning the display of the OSD of each item Images shown here may differ from the actual display image Remote control unit Example of a Menu Mode OperationPress the Menu button to display the menu screen Press the SET button Power Management Setting Adjustment and setting in the Menu ModeOFF on Others ....... Selectable resolutions are displayed Screen Signal Format SettingAuto Others Resolution KHz Signal format Remarks Polarity Menu Language Display Setting To cancel MUTE, press the Menu button, Input button etc Energy Saving SettingStandard MODE1, MODE2 MODE3 Mute MODE1 MODE2 ‘ENERGY SAVE’ setting is common for all inputs ScreenMODE3 Program/Repeat Timer Setting Timer SettingDaylight Saving Time OFF MODE1 MODE3 MODE2 Orbiter Setting ‘SOFT FOCUS’ setting is common for all inputs Screen Soft Focus Setting Auto SET UP Mode Auto Set Up Mode Setting Example When a PC signal is input to INPUT1 1024 x Screen Position, Clock Frequency and Clock Phase Adjustment 113 As shown below Auto Function Mode Setting ‘PIP DETECT’ setting is common for all inputs PIP Detect Setting ‘SPLIT FREEZE’ setting is common for all inputs Split Freeze SettingOFF By S PIP Concerning the display of the OSD of each Item Applicable only when a PDA-5003 PDA-5004 is installedPress the Menu button to display the menu Screen High Color Temperature SettingLOW OFF/DISABLE Power Management and Auto Power OFF SettingPlace the cursor over ‘POWER Management Auto Power OFF’ and change the setting with the SET Middle DNR digital noise reduction SettingOFF High 2 3 Middle 2 3 LOW Mpeg NR Setting CTI Setting OFF Purecinema SettingConversion is performed without I/P is converted OFF Input Correspondence Signal INPUT1, INPUT2, INPUT5 Color Decoding SettingConnected INPUT4 Auto Color System Setting 127 128 PLUG/PLAY PC DVI SettingPC 2 3 Video LOW 0 to 255 High 16 to 235 130 131 132 OFF Disables Daylight Saving Time mode Adjust each item by pressing the 5/ ∞/ 2/ 3 buttonsWeek Set current day of the week 134 135 136 137 138 139 140 141 About the Integrator Mode Integrator Mode To continue with adjusting another item, repeat steps 5 to Example of Integrator Mode Operation Picture Adjustment Adjustment and Setting in the Integrator ModeFor video signal input White Balance Adjustment Use the 5/ ∞ buttons to switch between items Screen Color Detail setting 31.8 Gamma Setting Screen For PC signal input Screen Screen Position AdjustmentPosition H. Position Clock H. Position Clock Phase 149 Audio block diagram concept diagram SUB Volume Setting Program timer settings Program Timer SettingTo reset the program To clear the set contents Viewing the program timer screen Screen Mask Setting Auto Side Mask OFF Side Mask Setting 155 Position Type Normal Auto ID OFF On Delay ABL Link Video Wall SettingSetting Method Setting the ID NO. SET Setting the screen divider Setting the display mode Setting the positionID positions for nine panels ID positions for 16 panels Turns on the power approximately every Setting the Power on DelaySecond Displays turns on at the same time Setting the ABL Link Baud Rate Setting Assigning an ID Remote Control ID01H to FFH ... The ID number is set to the designated Number 162 ‘FAN CONTROL’ setting is common for all inputs Screen Cooling Fan Control SettingMAX Setting the Screen display OSD Display SettingSetting the Screen size 165 On Normal LED function OFF Lights red during standby Screen Front Indicator SettingOn OFF ‘COLOR MODE’ setting is common for all inputs Color Mode Setting Factory setting Underscan PRO USE SettingImage Process Normal Signal Type Motion Image Process Mono Tone PureBlue only High CNT ‘FRC’ setting is common for all inputs Screen FRC SettingChanges the frame rate VIDEO/PC Applicable only when a PDA-5003 or PDA-5004 is installed Volume Power on Mode SettingLast INPUT1 Multi INPUT2 INPUT1 INPUT2 Setting when Multi is selectedINPUT1 2 3INPUT2 2 3INPUT3 INPUT5 2 3INPUT4 Last 2 3 0 to 42 SELECT1 Seamless SW SettingSELECT2 Seamless SW Mirror Mode Setting ‘MIRROR MODE’ setting is common for all inputs Screen By S Size Multiscreen SettingBy S Layout PIP Size Fade PIP Side by SIDE3 Side by SIDE1 Side by SIDE2Side by SIDE4 Side by SIDE5 179 Setting the single screen Repeat Timer Repeat Timer Setting Setting the Video Wall Repeat Timer Setting the two screen Repeat Timer ‘BUTTONS LOCK’ ‘IR LOCK’ ‘BUTTONS & IR LOCK’ ‘MEMORY LOCK‘ Functional Lock Center Position Display 184 185 186 187 188 About the RS-232C Adjustment RS-232C Adjustment RXD TXD CTS InterfaceTXD RXD RTS GND CTS TXD RXD RTS GND Connection method Combination ConnectionConnect the panels as shown in the figure below ID is assigned from the PC Commands IDC ID Clear Precautions when assigning IDsID Assignment IDS ID SET 193 Input Select Normal Operation Related Commands MENU-SETUP related commands RS-232C Adjustment Signal Format MENU-OPTION related commands INTEGRATOR-SCREEN related commands INTEGRATOR-PICTURE related commandsINTEGRATOR-SETUP related commands Screen Mask INTEGRATOR-OPTION related commands 199 PIP fade in function effective Other commands 201 Quest Command Table Quest Commands Obtaining QST Status Information Data Content QPI Obtaining Integrator/PICTURE information Data Content Size RemarksQWB Obtaining integrator/WHITE Balance information QPS Obtaining integrator/SCREEN information QSO Obtaining menu integrator/OPTION information QSS Obtaining Setup information Main screen size Main screen input function QCI Obtaining time information QSU obtaining the audio statusQAP Obtaining machine name COF Table of commands not compatible with PDP-505CMX Example 2 When 1 Byte of data in the data is unreadable Example 1 When the data is missing 1 ByteCheck Sum Examples of check sum applications Screen Burning Standard Functions Settings cannot be changed To enjoy using your plasma display for many yearsSetting example Setting with Menu Mode Setting with Integrator Mode Video input signal Input vertical Frame delay Concerning frame delay lip syncThese data are reference values they cannot be ensured Number Error Message Remedy PrecautionsSelf-diagnosis Function Cabinet and Remote-control Unit Connection procedureDisconnect and Remove Hardware Readjustment of the White Balance MaintenanceScreen front protection panel Vents