Pioneer 12 technical manual To attach the speed clamps to the main unit, To remove speed clamps

Installation Procedures

4) Arranging and securing cables with speed clamps and bead bands

Fasten cables using the supplied speed clamps.

Once speed clamps are fastened, they are

not easily removed.

* As viewed from the rear of the display.

1 2

1.Organize cables together using the provided speed clamps.

Insert 1 into an appropriate hole on the rear of the unit then snap 2 into the back of 1 to fix the clamp.

Speed clamps are designed to be difficult to undo once in place. Please attach carefully.

2.Bunch separated cables together and secure them with the provided bead bands.

Do not allow excessive stress to be placed on the ends of cables.

Note

Cables can be routed to the right or left.

To attach the speed clamps to the main unit

Connect the speed clamps using the 4 holes marked with “‡” below, depending on the situation.

* As viewed from the rear of the display.

To remove speed clamps

Using pliers, twist the clamp 90° and pull outward.

In some cases, the clamp may have deteriorated over time. Removed speed clamps may not be re-usable.

23