Pioneer 12 technical manual When a video card is installed Personal computer Screen size

						Before Beginning Adjustments
5) Screen size							Unit: % (percent)
		When a video card is installed			Personal computer
Screen size	Video signal 4:3 source		Video signal 16:9 source				Remarks
						signal
	(NTSC, 625i, etc.)			(750p, 1080i, etc.)
DOT BY DOT						100	This screen size exists for a personal computer
The input signal corresponds 1:1							signal when the input signals a less than the pixels
with the pixels of the Plasma							of the plasma display. For details, refer to the
Display for an accurate						100	correspondence signal table.
reproduction.
					100	100
4:3		95				100
For a 4:3 source, roundness can
be accurately reproduced (In order
to prevent burning of the screen,
this screen size should not be		95				100
used when possible).	95	95			100	100
FULL		95		95		100
This is for wide-screen video
(squeeze) (For a 16:9 source,
roundness is nearly accurate).
		95		95		100
	95	95	95	95	100	100
ZOOM		73
For a video signal, this is for a
cinesco (cinema scope) size video.

			73
	95	95
WIDE			90	90
This is for reproducing the 4:3
portion of a 4:3 source or 16:9
source on the entire screen
(roundness near the center is			90	90
nearly accurate).	95	95	72	72
UNDERSCAN			100	100	When selecting the underscan by switching the
This is used by a broadcast					screen size, please set to UNDERSCAN: ON using
station and the like for viewing					PRO USE of the integrator mode.
the portion outside the normal
effective display range.			100	100
	100	100	100	100
2.35:1			74	74
Displays 2.35:1 squeezed image
full-screen without black border.
However, portions of image at
right and left edges are cut.			74	74
	74	74	74	74
14:9			84
Displays expanded 4:3 screen
image without distortion.

84

9595

•The screen size settings are stored in memory for each function and for each input signal. Up to eight (8) sizes can be stored in memory for each function.

89