Pioneer 12 Connection to INPUT1 or INPUT5, When connecting to Analog RGB in INPUT1

Video Card: PDA-5003/PDA-5004

4.3.6 Connection to INPUT1 or INPUT5

7When using PDA-5003

Connection to AV components

Connection to AV component equipped with

component video jacks

Make component video connections for AV components equipped with component video jacks.

When connecting to ANALOG RGB IN (INPUT1)

		INPUT1
ANALOG RGB OUT	ANALOG RGB IN
(D-Sub)		(D-Sub)

On-screen setup is necessary after connection.

When connecting to ANALOG RGB (INPUT5)

		ANALOG RGB	INPUT5
G(ON SYNC)	B	R	HD (H/V SYNC) VD

Connect the Y signal to the G jack, the PB/CB signal to the B jack, and the PR/CR signal to the R jack. On-screen setup is necessary after connection.

INPUT5 jacks are all BNC jacks.

If necessary, use commercially available BNC/pin-plug conversion adapters to make connections.

Note

The Plasma Display and this Video Card are designed to support component video signals with standard, stable signal levels and sync signals. As a result, some image disruption may be generated during use of various special trick play functions on video components.

7When using PDA-5004

Connection to AV components

Connection to AV component equipped with

component video jacks

Make component video connections for AV components equipped with component video jacks.

When connecting to ANALOG RGB IN (INPUT1)

		INPUT1
ANALOG RGB OUT	ANALOG RGB IN
(D-Sub)		(D-Sub)

On-screen setup is necessary after connection.

When connecting to COMPONENT VIDEO (INPUT5)

COMPONENT	INPUT5
VIDEO

Y Pb/Cb Pr/Cr

Connect the Y signal to the Y jack, the PB/CB signal to the PB/CB jack, and the PR/CR signal to the PR/CR jack.

Note

The Plasma Display and this Video Card are designed to support component video signals with standard, stable signal levels and sync signals. As a result, some image disruption may be generated during use of various special trick play functions on video components.

53