Pioneer 12 Setting the two screen Repeat Timer, Setting the Video Wall Repeat Timer

Integrator Mode

7Setting the two screen REPEAT TIMER

• MODE	This sets the display mode.
	S BY S1 ⇔ S BY S2 ⇔ S BY S3 ⇔ BTM LEFT ⇔ BTM RIGHT ⇔ TOP RIGHT ⇔ TOP LEFT
• WORK TIME	The display time is set in a range from one minute to 24 hours.
[When Side-by-side has been set]
• LEFT	The selected signal is displayed on the left side of Side-by-side 1 to 3
• RIGHT	The selected signal is displayed on the right side of Side-by-side 1 to 3
[When Picture-in-picture has been set]
• MAIN	The selected signal is displayed on the main screen of Picture-in-picture.
• SUB	The selected signal is displayed on the sub screen of Picture-in-picture.

Note

Perform this operation after turning the setting of DIVIDER in “5.4.3 Adjustments and setting in the Integrator Mode: 11) VIDEO WALL Setting (pg. 156)” to OFF.

7Setting the Video Wall REPEAT TIMER

• DIVIDER	It sets screen division
	1 ⇔ 2 x 2 ⇔ 3 x 3
• WORK TIME	It sets the display time in a range from one minute to 24 hours.
• INPUT MODE	It sets the signal that is displayed
	INPUT1 ⇔ INPUT2

Note

•Perform this operation after turning the setting of AUTO ID in “5.4.3 Adjustments and setting in the Integrator Mode: 11) VIDEO WALL Setting (pg. 156)”.

•The REPEAT TIMER of Video Wall and two screens do not operate simultaneously.

•In the case of VIDEO WALL, only No. 1 is set and all sets are controlled.

181