Pioneer 12 technical manual Setting when Multi is selected, INPUT1 INPUT2, Last 2 3 0 to 42

Integrator Mode

7Setting when MULTI is selected

Place the cursor on ‘MULTI MODE’ then use the [2/3] buttons to change the settings. Each time a [2/3] button is pressed, the setting changes as shown below.

3 SIDE BY SIDE1 2 3 SIDE BY SIDE2 2 3 SIDE BY SIDE3 2

3 TOP LEFT 2 3 TOP RIGHT 2 3 BOTTOM RIGHT 2 3 BOTTOM LEFT 2

Change the setting by placing the cursor on LEFT (or MAIN) in INPUT MODE, then pressing the [2/3] buttons. The signal that has been selected is displayed in the left screen of SIDE BY SIDE 1 to 3 (or in the main screen of Picture-in-picture).

Each time a [2/3] button is pressed, the setting changes as shown below.

For PC signal input

3INPUT1 2

3INPUT2 2

For video signal input (Applicable only when a PDA-5003/PDA-5004 is installed.)

3 INPUT1 2 3INPUT2 2 3INPUT3 2

3 INPUT5 2 3INPUT4 2

Change the setting by placing the cursor on RIGHT (or SUB) in INPUT MODE, then pressing the [2/3] buttons. The signal that has been selected is displayed in the right screen of SIDE BY SIDE 1 to 3 (or in the sub screen of Picture-in-picture).

Each time a [2/3] button is pressed, the setting changes as shown below.

For PC signal input

3INPUT1 2

3INPUT2 2

For video signal input (Applicable only when a PDA-5003/ PDA-5004 is installed.)

3 INPUT1 2 3INPUT2 2 3INPUT3 2

3 INPUT5 2 3INPUT4 2

5Place the cursor on ‘VOLUME’ then use the [2/3] buttons to change the settings.

Each time a [2/3] button is pressed, the setting changes as shown below.

3LAST 2 3 0 to 42 2

Screen 5

	P W R . O N	M O D E
I N P U T		: I N P U T 1
V O L U M E		:	0
R E T U R N		:
			MENU EXIT
SET

173