Pioneer 12 technical manual Controls and Connectors, Main unit Operation panel on the main unit

Controls and Connectors

2.3 Controls and Connectors

Main unit 3

Main unit

Operation panel on the main unit

￿STANDBY/ON	MENU	DISPLAY	INPUT SCREEN SIZE – VOL +
		/ SET

4 506 7 8 9

2 1

Main unit

1 Remote control sensor

Point the remote control toward the remote sensor to operate the unit.

2 STANDBY/ON indicator

When the unit is operating: The indicator lights green.

When flashing, the light indicates an error.

The indicator flashes green once per second when the [POWER MGT.] function is operating.

When the unit is in Standby, the indicator lights red. When flashing, the light indicates an error.

3Handles

Operation panel on the main unit

4 STANDBY/ON button ()

Press to put the display in Standby or into operation.

5 MENU button

Press to open and close the on-screen menu.

6 DISPLAY/SET button

Use to confirm on-screen menu selections and to change settings.

When not in use by on-screen menus, press to display the current set status.

7 INPUT (’) button

Except when menu screen is displayed, this button can change the input.

8 SCREEN SIZE (‘) button

Except when menu screen is displayed, this button can change the screen size.

9VOL +/– (}/]) buttons

When not in use for by on-screen menus, these buttons can adjust the sound volume.

0 Functional lock button (concealed button)

This button is used to switch between permitted and blocked operation of the control panel and the remote control. It can also set the input function memory.

10