Pioneer 12 technical manual INTEGRATOR-OPTION related commands, Screen Mask

RS-232C Adjustment

7“INTEGRATOR”–“OPTION” related commands

Command Command Command

434CMXFunction 425CMX 607CMX

505CMX

SCREEN MASK

FMK	+	+	Displays the present set value of SCREEN MASK.
FMKS00	+	+	Sets SCREEN MASK to OFF.
FMKS02	+	+	Sets SCREEN MASK to inverse (negative – positive reversed).
FMKS03	+	+	Sets SCREEN MASK to white mask.
FMKS04	+	+	Sets SCREEN MASK to red mask.
FMKS05	+	+	Sets SCREEN MASK to green mask.
FMKS06	+	+	Sets SCREEN MASK to blue mask.
FMKS07	+	+	Sets SCREEN MASK to yellow mask.
SIDE MASK
RSL	+	+	Adjusts side mask RED.
GSL	+	+	Adjusts side mask GREEN.
BSL	+	+	Adjusts side mask BLUE.
–	+	SMAS00	Sets AUTO SIDE MASK to OFF.
–	+	SMAS01	Sets AUTO SIDE MASK to ON.
VIDEO WALL
MGF	+	+	Displays the set value of VIDEO WALL.
MGFS00	+	+	Sets VIDEO WALL to OFF.
–	MGFS11	+	Sets VIDEO WALL to DIVIDER:1.
–	MGFS12	+	Sets VIDEO WALL to DIVIDER:4.
–	MGFS13	+	Sets VIDEO WALL to DIVIDER:9.
–	MGFS14	+	Sets VIDEO WALL to DIVIDER:16.
–	MGFS15	+	Sets VIDEO WALL to DIVIDER:25.
MGP	+	+	Displays the present VIDEO WALL (accounting/not accounting
			for expanded position/joints) setting.
MGPSnn	+	+	nn=01 to 04: Sets display position during DIVIDER=2 x 2 (not
			accounting for joints).
			nn=05 to 08: Sets display position during DIVIDER=2 x 2
			(accounting for joints).
			nn=10 to 18: Sets display position during DIVIDER=3 x 3 (not
			accounting for joints).
			nn=20 to 28: Sets display position during DIVIDER=3 x 3
			(accounting for joints).
			nn=30 to 3F: Sets display position during DIVIDER=4 x 4 (not
			accounting for joints).
			nn=40 to 4F: Sets display position during DIVIDER=4 x 4
			(accounting for joints).
			nn=50 to 68: Sets display position during DIVIDER=5 x 5 (not
			accounting for joints).
			nn=70 to 88: Sets display position during DIVIDER=5 x 5
			(accounting for joints).
–	IDA	+	Executes AUTO ID setting.
–	PDES00	+	Sets POWER ON DELAY mode to OFF.
			Sets POWER ON DELAY mode to ON (other than cases used for
–	PDES01	+	a higher than 16 screen system) or mode 1 (used for a higher
			than 16 screen system).
–	PDES02	+	Sets POWER ON DELAY mode 2 (used for a higher than 16
			screen system).
–	LNKS00	+	Sets ABL link to OFF.
–	LNKS01	+	Sets ABL link to ON.
RS-232C
BRA	+	+	Displays the present set value of baud rate.
BRAS01	+	+	Sets the RS-232C baud rate to 1200 bps.
BRAS02	+	+	Sets the RS-232C baud rate to 2400 bps.
BRAS03	+	+	Sets the RS-232C baud rate to 4800 bps.
BRAS04	+	+	Sets the RS-232C baud rate to 9600 bps.
BRAS05	+	+	Sets the RS-232C baud rate to 19200 bps.
BRAS06	+	+	Sets the RS-232C baud rate to 38400 bps.
ID NUMBER
IDC	+	+	Clears the ID number.
IDS	+	+	Sets the ID number.

Number direct			Last
Effective	Minimum Maximum		memory
			￿
			￿
			￿
			￿
			￿
			￿
			￿
￿	000	255	￿
￿	000	255	￿
￿	000	255	￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿

Comment

New

New

198