Pioneer 12 technical manual Connection of G on Sync analog RGB source

Video Card: PDA-5003/PDA-5004

Connection of G ON SYNC analog RGB source

Make G ON SYNC connections for a component with output that has the synchronization signal layered on top of the green signal.

When connecting to ANALOG RGB IN (INPUT1)

		INPUT1
ANALOG RGB OUT	ANALOG RGB IN
(D-Sub)		(D-Sub)

On-screen setup is necessary after connection.

When connecting to ANALOG RGB (INPUT5)

[Connections for PDA-5003]

		ANALOG RGB	INPUT5
G(ON SYNC)	B	R	HD (H/V SYNC) VD

On-screen setup is necessary after connection.

Note

When making G ON SYNC connections, do not make any connections to the VD or HD jacks. If connections are made, the picture may be not displayed normally.

When connecting to COMPONENT VIDEO (INPUT5)

[Connections for PDA-5004]

COMPONENT	INPUT5
VIDEO

Y Pb/Cb Pr/Cr

Connect the G ON SYNC signal to the Y jack, the B signal to the PB/CB jack, and the R signal to the PR/CR jack.

On-screen setup is necessary after connection.

54