Pioneer 12 technical manual Color Mode Setting, ‘COLOR MODE’ setting is common for all inputs

Integrator Mode

17) COLOR MODE Setting

In addition to the normal operation mode (NORMAL), this display has a (STUDIO) mode for use in a TV studio. The adjustment values for ‘PICTURE’ and ‘SCREEN’ can be set independently.

(Refer to section 5.4.4, “PICTURE, White Balance and SCREEN position Adjustment Values Memory Area Tables” (pg. 184).)

Change the settings to meet the desired usage.

Factory setting: NORMAL

1 Enter the integrator mode.

(Refer to section 5.4.1, “About the Integrator Mode” (pg. 142).)

2 Select ‘OPTION’.

3Place the cursor on ‘COLOR MODE’ then press the [SET] button to change the setting.

Each time the [SET] button is pressed, the setting changes as shown below.

3NORMAL STUDIO 2

When the ‘COLOR MODE’ setting is changed, all input functions as well as the ‘PICTURE’ and ‘SCREEN’ adjustment values for the input signal are changed.

Screen 3

I N T E G R AT O R				I N P U T 1
PICTURE S C R E E N		S E T U P		O P T I O N
F A N C O N T R O L		: A U T O
O S D	I N D I C ATO R :
F R O N T			O N
C O L O R MOD E		: N O R M A L
P R O U S E
F R C		:	O N
SET CHANGE			MENU	EXIT

The ‘COLOR MODE’ setting is common for all inputs.

167