Pioneer 12 technical manual Daylight Saving Time, Program/Repeat Timer Setting

Menu Mode

5)Timer Setting

The present day of the week, time, and daylight savings time are set.

1 Select ‘OPTION’.

2 Place the cursor on ‘TIMER SETTING’ then press the [SET]

button.
3 Place the cursor on ‘PRESENT TIME’ then press the [SET]	Screen 3
button.

P R E S E N T T I M E

4Adjust each item by pressing the 5/∞/2/3 buttons.

DAYLIGHT SAVING TIME	sets daylight savings time	DAY L I G H T
			S AV I N G T I M E		: O F F
ON: Displays time as present time + one hour				M O N DAY
		1 2 : 0 0 : 0 0
OFF: Disables [DAYLIGHT SAVING TIME] mode
		S E T
Week	Set current day of the week	R E T U R N
Hour, Minute	Sets to current time.			–	MENU EXIT
			SET

Note

The set time may slow by approximately one minute per month from the actual time.

The ‘TIMER SETTING’ is set for all inputs.

6) Program/Repeat Timer Setting

It can operate the preset PROGRAM TIMER and REPEAT TIMER.

Factory setting: OFF

1 Select ‘OPTION’.

2Place the cursor on ‘TIMER SETTING’ then press the [SET] button.

3Change the setting by pressing the 2/3 buttons to move the cursor to the ‘PROGRAM/REPEAT’.

Each time a 2/3 button is pressed, the setting changes as shown below.

3OFF

REPEAT 2 PROGRAM 2

Note

For the PROGRAM/REPEAT TIMER setting, refer to “Program Timer Setting (pg. 151)” and “Repeat Timer Setting (pg. 180)” in Integrator Mode.

Screen 3

T I M E R S E T T I N G

P R E S E N T T I M E

P RO G R A M / R E P E AT: O F F R E T U R N

SET – MENU EXIT

108