Pioneer 12 technical manual Screen Screen Position Adjustment, Screen For PC signal input

Integrator Mode

5)SCREEN (Screen Position) Adjustment

The adjustable items are H. POSITION, V. POSITION, CLOCK, PHASE, H. SIZE and V. SIZE.

1 Enter the integrator mode then switch to the input (INPUT1 to INPUT5) to be adjusted.

2 Select ‘SCREEN’ then select the item to adjust.

In screen 2, when ‘YES’ is selected for the ‘SCREEN RESET’, all SCREEN values return to the factory settings.

Screen 2

For PC signal input

I N T E G R AT O R						I N P U T 1
PICTURE	S C R E E N		S E T U P				O P T I O N
H . P O S I TO I N		:			1 2 8
V . P O S I TO I N		:		1 2 8
C L O C K		:		1 2 8
P H A S E		:		1 6
H . S I Z E		:		3 2
V . S I Z E		:		3 2
S C R E E N R E S E T

SET

ENTER

MENU

EXIT

For video signal input

(Applicable only when a PDA-5003/PDA-5004 is installed.)

I N T E G R ATO R						I N P U T 1
PICTURE	S C R E E N		S E T U P				O P T I O N
H . P O S I TO I N		:			1 2 8
V . P O S I TO I N		:		1 2 8
H . S I Z E		:		3 2
V . S I Z E		:		3 2
S C R E E N R E S E T

SET

ENTER

MENU

EXIT

3 Perform the adjustment.

Note

‘CLOCK’ and ‘PHASE’ can be adjusted when there is PC signal input.

Use the [5/∞] buttons on the remote control or the main- control panel to select a different item.

Use the [2/3] buttons on the remote control or the main- control panel to change settings.

The values adjusted here become the menu mode’s initial values.

Press the [SET] button to return to screen 2.

Screen 3

H . P O S I T I O N		:	1 2 8
SET	SET		MENU EXIT

<Adjustable Range>

H. POSITION, V. POSITION when there is PC signal input: 0 to 255 (initial value: 128)

H. POSITION, V. POSITION when there is video signal input: 0 to 127 (initial value: 64) (When a PDA-5003/PDA- 5004 is used.)

H. SIZE, V. SIZE: 0 to 63 (initial value: 0)

CLOCK: 0 to 255 (initial value: 128)

PHASE: 0 to 31 (initial value: 16)

<Adjustment Order>

Performing adjustment in the following order is effective.

V. POSITION ￿ H. POSITION ￿ CLOCK ￿ H. POSITION ￿ CLOCK ￿ PHASE

148