Pioneer 12 Assigning an ID, 01H to FFH ... The ID number is set to the designated, Number

Integrator Mode

13) Assigning an ID

This option assigns the ID necessary to adjust only the designated display in a video wall or to make an adjustment using an RS-232C command. For details see “5.5 RS-232C Adjustment” (pg. 189).

Factory setting: ALL

1 Enter the integrator mode.

(Refer to section 5.4.1, “About the Integrator Mode” (pg. 142).)

2 Select ‘OPTION’.
3 Place the cursor on ‘ID NO. SET’ then press the [SET]	Screen 3
button.
		I N T E G R AT O R					I N P U T 1
		P I C T U R E			S C R E E N	S E T U P		O P T I O N
		P ROG R A M T I M E R
		S C R E E N M A S K				: G R E E N
		S I D E	M A S K
		V I D E O		WA L L
		BAU D	R A T E			: 1 2 0 0 B P S
		I D N O . S E T				: 0 1 H

SET

ENTER

MENU

EXIT

4 Press the [2/3] buttons to change the settings.	Screen 4
Each time a [2/3] button is pressed, the setting changes
as shown below.

3ALL 2 3 01H to FFH 2

ALL ............... ID number cannot be set so the panel can
be operated from all remote controls.	I D N O . S E T	: 0 1 H
01H to FFH ... The ID number is set to the designated	SET SET	MENU EXIT
number.
Display ID numbers may match the ID number that is displayed when the remote control’s ID NO.
SET button is pressed. The remote control’s [ID NO. SET], [CLEAR] buttons are operational.
Press the [SET] button to return to screen 3.
The ‘ID NO. SET’ settings are common for all inputs.

7The Remote Control ID

When several Plasma Displays are installed at a single location, it is possible to operate only specified Plasma Displays with the remote control. Set the following options:

Factory setting: ALL

1 Register panel ID numbers through the integrator menu.

2Separately register the ID numbers for remote control use with the [ID NO. SET] button on the remote control. Press the [ID NO. SET] button to display screen 2. Each time a [2/3] button is pressed, the setting changes as shown below.

3 ALL 2 3 01H to FFH 2

Screen 2

I D S E L E C T

P O S I T I O N : 1

I D N U M B E R : A L L

SET

SET

MENU

EXIT

161