Pioneer 12 technical manual Quest Commands, Quest Command Table

Note

RS-232C Adjustment

5.5.6 QUEST Commands

What are QUEST commands?

•Quest commands output TXD such as adjustment data from the panel’s microprocessor to a PC.

•Adjustment and other data is output in ASCII code.

Note Command names are given inside brackets < >.

•Data output format

STX (02hex)	Command	Data	····	Data	Checksum	ETX (03hex)
	(3 Byte)				(2 Byte)

•A QUEST command is invalid when no ID has not been assigned.

•A QUEST command is invalid when a wildcard (*) is used in the ID when sending the command.

7Quest Command Table

Command	Command	Command		Number direct			Last
434CMX			Function					Comment
	425CMX	607CMX		Effective	Minimum	Maximum	memory
505CMX
GST	QST	+	Obtains status information.
GPI	QPI	+	Obtains integrator/PICTURE information.
GWB	QWB	+	Obtains integrator/WHITE BALANCE information.
GPS	QPS	+	Obtains integrator/SCREEN information.
GSS	QSS	+	Obtains SETUP information.
GSO	QSO	+	Obtains Menu Integrator/OPTION information.
–	QAP	+	Obtains audio status.
–	QCI	+	Obtains time information.
–	QSU	+	Obtains various machine names.

202