Pioneer 12 Menu Language Display Setting, Resolution KHz Signal format Remarks Polarity

							Menu Mode
	V	H			Menu mode	RS232C
Resolution			V [Hz]	H [kHz]	Signal format	Signal format	Remarks
	polarity	polarity
					Set values	Set values
1360x768	Pos.	Pos.	60.0	47.7	1360x768	TYPE 2
1376x768	Pos.	Neg.	59.9	48.3	1376x768	TYPE 3
1280x800	-	-	60.0	49.7	1280x800	TYPE 2
1280x854	-	-	60.0	53.1	1280x854	TYPE 3
1152x864	-	-	60.0	53.7	1152x864	TYPE 4
1152x864	-	-	75.0	67.5	1152x864	TYPE 2
1280x1024	Pos.	Pos.	60.0	63.9	1280x1024	TYPE 1
1400x1050	Neg.	Neg.	59.9	64.1	1400x1050-1	TYPE 2
1680x1050	-	-	60.0	65.3	1680x1050	TYPE 7
1920x1080	-	-	50.0	56.3	1920x1080	TYPE 3	Only INPUT2 effective.
							DVI SETUP is set on the PC.
1920x1080	-	-	60.0	67.5	1920x1080	TYPE 9	Only INPUT2 effective.
							DVI SETUP is set on the PC.
1600x1200	-	-	60.0	75.0	1600x1200	TYPE 5
1920x1200	-	-	59.9	74.6	1920x1200	TYPE 3
1920x1200	-	-	60.0	74.0	1920x1200RB	TYPE 4

3)Menu Language Display Setting

The factory setting for the menu display language is English. To change to another language, set the selection in the menu.

Factory setting: ENGLISH

1 Select ‘OPTION’.
2 Place the cursor over ‘LANGUAGE’ and press the [SET]	Screen 2
button.

L A N G U A G E :

SET SET

E N G L I S H

MENU EXIT

3 Each time a [2/3] button is pressed, the language changes as shown below.

3 ENGLISH 2		3 FRANÇAIS 2		3 ESPAÑOL 2
3	2	3 ITALIANO 2	3		DEUTSCH 2

With the desired language displayed, press the [SET] button.

Note

Screen 3

L A N G UAG E	: F R A N Ç A I S
SET SET	MENU EXIT

Setting the display language for either INPUT1 or INPUT2 sets the language for both inputs.

105