Pioneer 12 technical manual Special Instruction Hanging on the wall

Special Instruction (Hanging on the wall)

3.4.2 Hanging on the wall

Carefully read the following imformation before attempting to hang the unit on a wall. Take note of the various limitations specified in this section. Mount the unit so that twisting, bending, or any other warping does not exceed 4 mm.

A		B
		880
		50
	C	25

162

D

Shaded areas indicate attachment points for mounting hardware. : Thermometer (temperature measurement point)

1470

D

Operating temperature restrictions

✩ Standard single-unit installation

Distance from wall (A)	B	C	D	Ambient temperature
50 mm or less	300 mm or more	300 mm or more	300 mm or more	0 °C to 35 °C
50 mm or more	100 mm or more	50 mm or more	50 mm or more	0 °C to 40 °C

✩ Requirements when used with PDP-S55-LR speaker system

When installed as a single unit, all requirements are the same as those listed above for horizontal/ vertical, left/right reverse installations. However, the figures listed above indicate the distance between the speakers and the wall.

Note

Different temperature restrictions apply to the PDK-WM03. Refer to “4.5 Wall Mount Unit PDK-WM03” (pg. 68). For a wall-mount installation, allow adequate space (a clearance of 300 mm or more) above, below, and to each side of the panel.

26