Pioneer 12 Standard Mounting Components Features and Characteristics, ¶ Table Top Stand PDK-TS26

How to use the standard mounting components

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and vivid display resulting from its large screen area, brightness, and image quality, the Plasma Display (PDP-607CMX) is thin and lightweight. This panel can be mounted in locations not possible for conventional displays.

We considered various mounting patterns and operating conditions during the design of the Plasma Display (PDP- 607CMX). A wide range of standard mounting hardware is available for easy mounting.

¶Video Card: PDA-5003/PDA-5004

The video card makes video input and analog RGB input possible.

This product has a total of three lines: a COMPOSITE (1), S INPUT (1), and an analog RGB INPUT or COMPONENT INPUT (1). Furthermore, it can handle three line or two line audio, thus increasing the uses for video presentations.

¶Table Top Stand: PDK-TS26

This vertically installed type onboard stand is a perfect match to the 60-inch Plasma Display.

¶Wall Mount Unit: PDK-WM03

This wall mount unit is made for the 60-inch Plasma Display. It fixes the rear surface of the plasma display 45 mm from the wall. It is equipped with a variety of installation holes so it can be used on different kinds of walls. This structure simplifies attaching it to the Plasma Display.

¶Speaker System: PDP-S55-LR

This is a speaker system designed for use with the 60-inch Plasma Display.

2-way speakers feature 5 cm (2 in.) tweeter and 8 cm (3-3/16 in.) woofer in a vertical arrangement.

44