Pioneer 12 technical manual 149

Integrator Mode

6)Brightness Enhancement (BRT. ENHANCE) Setting at the Center of the Screen This function improves and enhances the brightness of the center of the screen.

•When emphasizing the brightness of the screen: Set to ON.

•When emphasizing uniformity of the screen: Set to OFF.

Factory setting: OFF

1Enter the integrator mode.

(Refer to section 5.4.1, “About the Integrator Mode” (pg. 142).)

2Select ‘SETUP’.

3 Place the cursor on ‘BRT. ENHANCE’ then press the [SET]	Screen 3
button.	I N T E G R AT O R						I N P U T 1
	PICTURE		S C R E E N		S E T U P			O P T I O N
	B R T. E N H A N C E				: O F F
	S U B VO L U M E			:		2 0
	SET	ENTER				MENU		EXIT

4 Each time a [2/3] button is pressed, the setting changes	Screen 4
as shown below.

3ON 2

3OFF 2

Perform the BRT. ENHANCE setting for each input (INPUT1 to INPUT5).

Also, perform the setting for both PC and video signals.

After setting is complete, press the [SET] button to return	B R T. E N H A N C E	: O F F
	SET SET	MENU EXIT
to screen 3.

Note

During video wall, the BRT. ENHANCE function is unavailable, however, settings can still be changed.

149