Audio connections | Pioneer 12 manual

Video Card: PDA-5003/PDA-5004

4.3.11 Audio connections

Before making connections, be sure to check that the audio component’s power and the display’s main power is off.

Connect an audio component to the audio input jack of the Plasma Display with installed video card.

When the video card is installed, the Plasma Display provides four or five audio input jacks and one audio output jack. Consult the following chart to choose the proper audio input for each video input.

	Video	Audio input		Sound output
	input	Audio input		Sound output
	input
	INPUT1	Stereo mini jack (L/R)		Sound of the selected
	INPUT2	Stereo mini jack (L/R)		video input is output from
				the
	INPUT5	Pin jacks (L/R)		the
				• SPEAKER (L/R) terminals
	INPUT3	Pin jacks (L/R) *1		• SPEAKER (L/R) terminals
				• Stereo mini jack (L/R).
	INPUT4	Pin jacks (L/R)	*1	• Stereo mini jack (L/R).
	INPUT4	Pin jacks (L/R)

*1 When using the PDA-5003, the INPUT3 and INPUT4 audio input connectors are shared.

Audio connection for component connected to

INPUT1

OUTPUT INPUT1 INPUT2

AUDIO AUDIO AUDIO

Audio connections for component connected to

INPUT2

OUTPUT INPUT1 INPUT2

AUDIO AUDIO AUDIO

A stereo miniplug cable can be used to connect the audio output from the component connected to INPUT2, to the Plasma Display’s AUDIO (INPUT2) jack (L/R).

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

Audio connection for component connected to

INPUT5

INPUT5AUDIO

R L

A stereo miniplug cable can be used to connect the audio output from the component connected to INPUT1, to the Plasma Display’s AUDIO (INPUT1) jack (L/R).

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

The audio line for the component connected to INPUT5 can be connected to the AUDIO R/L (INPUT5) pin jacks.

Sound is output from both the AUDIO (OUTPUT) stereo mini jack (L/R) and the SPEAKER (L/R) terminals according to the video input selection.

60

Image 60

Pioneer 12 technical manual Audio connection for component connected to, Audio connections for component connected to

Contents

Technical Manual Ver To use this product safely Table of Contents Table of Contents Precautions RGB signals from AV devices other than PCsIntroduction Input Features and Functions of this device Specifications Input Response Signals PC signals supportedRefresh rate Dot x Line Vertical External Dimensions Light Sensor for the remote/ambient light Sensor/indicator Main Unit Operation PanelConnection panel Controls and Connectors Main unit Operation panel on the main unitMain unit 567 Plasma Display Section Video Card PDA-5003 Section Video Card PDA-5004 Section INPUT1 Mini D-sub, 15-pin connector female Pin layout INPUT2 DVI-D 24 pin connector female Pin layoutPin layout Combination IN/OUT terminal pin layout Remote Control Unit Installation Site Requirements Safety Precautions Temperature and humidity conditions Power requirementsEffective remote control distance Prevent condensation Installation Conditions Heat dissipation Rear view diagram Side view diagram Calculating heat quantityProduct mounting holes Methods of securing Mounting surface warping Installation Procedures Transportation precautionsUnpacking Ref. No Terms Wiring Organize cables together using the provided speed clamps Using pliers, twist the clamp 90 and pull outwardTo attach the speed clamps to the main unit To remove speed clamps Special Installation Mounting to fittings Operating environment for standard installationAmbient Temperature 0 C to 40 C examples 1 Operating environment for vertical installation *1 Vertical installation Example Requirements when used with PDP-S55-LR speaker system Special Instruction Hanging on the wallHanging on the wall Special Installation Hanging on the wall Flush-wall installationWall-mounted installation Wall-embedded installation Special Installation Embedding in the wall Operating Temperature RestrictionsEmbedding in the wall Viewed from Above Thermometer temperature measurement point Embedding in walls with no space provided behind the unit Special installation When the display is put in a box When the display is put in a boxUsage temperature conditions BOX air temperature Ambient temperature 0 C to 35 C Special Installation Ceiling suspension with wires Ceiling suspension with wiresAmbient Temperature 0 C to 40 C Special Installation Ceiling suspension with wires Special Installation Hanging on the wall lengthwise Operating Temperature Restrictions *1Hanging on the wall lengthwise Installation is not possible Temperature in space X and Y Mm to 370 mm Viewed from Above Viewed from the Right SidePage Embedding in walls with no space provided behind the unit Page Special Installation Installed facing upward Installed facing upwardHorizontal surface Operating Temperature Restrictions *1 Usage temperature conditions *1 Special installation Horizontal connections Horizontal connectionsMm or more To 40 C Special installation Multiple MultipleMm to 300 mm or less To 35 C Mm or more To 40 C Standard Mounting Components Features and Characteristics ¶ Video Card PDA-5003/PDA-5004¶ Table Top Stand PDK-TS26 ¶ Wall Mount Unit PDK-WM03 Handling precautions Precautions for installation contractorsHandling the Standard Mounting Components Specifications Video Card PDA-5003/PDA-5004 Accessories PDA-5004 Video-related External Dimensions PDA-5003PDA-5004 Connection panel when equipped with PDA-5003 Connection panel when equipped with PDA-5004 Installing procedures Installation NotesInstallation Impedance selector switch is found only on the PDA Remove the two screws holding the video card Holding the inside tabs, pull the video card straight out Input connectors on the Plasma Display with video card When using PDA-5003When using PDA-5004 Connection to INPUT1 and INPUT5 When connecting to Analog RGB in INPUT1 On-screen setup is necessary after connectionWhen connecting to Analog RGB INPUT5 When connecting to Component Video INPUT5 Connection of G on Sync analog RGB source Connection of composite Sync analog RGB Source Connection of separate Sync analog RGB Source When connecting to Analog RGB OUT INPUT1 To an external monitor INPUT1 Connection to INPUT2 Connection to INPUT3Connection to INPUT4 Computer or AV component Video Video signal Signal type Signal formatAbout DTV set top box connection Audio connections Audio connection for component connected toAudio connections for component connected to INPUT3 Signal Format Remark Input 1 Applies only when equipped with PDA-5003/PDA-5004 Vertical Horizontal Signal Remark Package dimensions Table Top Stand PDK-TS26Other factors External Dimensions When using Plasma Display Stand assembling Attaching the Stand to the Plasma Display Wall Mount Unit PDK-WM03 ComponentsAttachment Restrictions Center of the display Hardware assembly and Plasma Display attachment Installing the hung on wall unit on the wallAttaching the metal fittings Installing the Plasma Display Speaker System PDP-S55-LR External Dimensions when mounted to the Plasma Display Installation on the Plasma Display Installation procedureInstall the speaker system according to the steps 1 through Speaker System PDP-S55-LR Care and Maintenance When the cabinet gets dirty Speaker System PDP-S55-LR Before Beginning Adjustment Operation Mode Before Beginning Adjustments List of Input Correspondence Signals Input correspondence signals personal computer signals Resolution Refresh rate Not available Screen size Personal computer signal Screen sizeDOT by DOT Full INPUT1, INPUT5 Signal Format Screen size Remark Screen size Signal Format 640x480 59.9 Hz 31.5 kHz INPUT2 Refresh rate Screen size Dot x line When a video card is installed Personal computer Screen size List of Adjustable and Settable Items Menu Mode PDP-607CMX Before Beginning Adjustments PDA-5003/PDA-5004 Slot card other than PDA-5003/PDA-5004 Integrator mode PDP-607CMX Applicable only when a PDA-5003/PDA-5004 is installed PDA-5003/PDA-5004 Slot card other than PDA-5003/PDA-5004 Last Memory AgingSaving to Memory Normal Operating Mode Normal Operation Mode About normal operation mode149 351 Normal Operating Mode Side-by-side OFF Picture-in-pictureLower right Upper right Lower left Menu Mode About menu modeConcerning the display of the OSD of each item Images shown here may differ from the actual display image Example of a Menu Mode Operation Remote control unitPress the Menu button to display the menu screen Press the SET button Adjustment and setting in the Menu Mode Power Management SettingOFF on Signal Format Setting Others ....... Selectable resolutions are displayed ScreenAuto Others Menu Language Display Setting Resolution KHz Signal format Remarks Polarity Energy Saving Setting To cancel MUTE, press the Menu button, Input button etcStandard MODE1, MODE2 MODE3 Mute ‘ENERGY SAVE’ setting is common for all inputs Screen MODE1 MODE2MODE3 Timer Setting Program/Repeat Timer SettingDaylight Saving Time Orbiter Setting OFF MODE1 MODE3 MODE2 Soft Focus Setting ‘SOFT FOCUS’ setting is common for all inputs Screen Auto Set Up Mode Setting Auto SET UP Mode Screen Position, Clock Frequency and Clock Phase Adjustment Example When a PC signal is input to INPUT1 1024 x 113 Auto Function Mode Setting As shown below PIP Detect Setting ‘PIP DETECT’ setting is common for all inputs Split Freeze Setting ‘SPLIT FREEZE’ setting is common for all inputsOFF By S PIP Item Applicable only when a PDA-5003 PDA-5004 is installed Concerning the display of the OSD of eachPress the Menu button to display the menu Screen Color Temperature Setting HighLOW Power Management and Auto Power OFF Setting OFF/DISABLEPlace the cursor over ‘POWER Management Auto Power OFF’ and change the setting with the SET DNR digital noise reduction Setting MiddleOFF High 2 3 Middle 2 3 LOW Mpeg NR Setting CTI Setting Purecinema Setting OFFConversion is performed without I/P is converted Input Correspondence Signal OFF Color Decoding Setting INPUT1, INPUT2, INPUT5Connected Color System Setting INPUT4 Auto 127 128 DVI Setting PLUG/PLAY PCPC 2 3 Video LOW 0 to 255 High 16 to 235 130 131 132 Adjust each item by pressing the 5/ ∞/ 2/ 3 buttons OFF Disables Daylight Saving Time modeWeek Set current day of the week 134 135 136 137 138 139 140 141 Integrator Mode About the Integrator Mode Example of Integrator Mode Operation To continue with adjusting another item, repeat steps 5 to Adjustment and Setting in the Integrator Mode Picture AdjustmentFor video signal input White Balance Adjustment Color Detail setting Use the 5/ ∞ buttons to switch between items Screen Gamma Setting 31.8 Screen Screen Position Adjustment Screen For PC signal inputPosition H. Position Clock H. Position Clock Phase 149 SUB Volume Setting Audio block diagram concept diagram Program Timer Setting Program timer settingsTo reset the program To clear the set contents Viewing the program timer screen Screen Mask Setting Side Mask Setting Auto Side Mask OFF 155 Video Wall Setting Position Type Normal Auto ID OFF On Delay ABL LinkSetting Method Setting the ID NO. SET Setting the screen divider Setting the position Setting the display modeID positions for nine panels ID positions for 16 panels Setting the Power on Delay Turns on the power approximately everySecond Displays turns on at the same time Setting the ABL Link Baud Rate Setting Remote Control ID Assigning an ID01H to FFH ... The ID number is set to the designated Number 162 Cooling Fan Control Setting ‘FAN CONTROL’ setting is common for all inputs ScreenMAX OSD Display Setting Setting the Screen displaySetting the Screen size 165 Front Indicator Setting On Normal LED function OFF Lights red during standby ScreenOn OFF Color Mode Setting ‘COLOR MODE’ setting is common for all inputs PRO USE Setting Factory setting UnderscanImage Process Normal Signal Type Motion Image Process Pure Mono ToneBlue only High CNT FRC Setting ‘FRC’ setting is common for all inputs ScreenChanges the frame rate Applicable only when a PDA-5003 or PDA-5004 is installed VIDEO/PC Power on Mode Setting VolumeLast INPUT1 Multi INPUT2 Setting when Multi is selected INPUT1 INPUT2INPUT1 2 3INPUT2 2 3INPUT3 INPUT5 2 3INPUT4 Last 2 3 0 to 42 Seamless SW Setting SELECT1SELECT2 Seamless SW Mirror Mode Setting ‘MIRROR MODE’ setting is common for all inputs Screen Multiscreen Setting By S SizeBy S Layout PIP Size Fade PIP Side by SIDE1 Side by SIDE2 Side by SIDE3Side by SIDE4 Side by SIDE5 179 Repeat Timer Setting Setting the single screen Repeat Timer Setting the two screen Repeat Timer Setting the Video Wall Repeat Timer Functional Lock ‘BUTTONS LOCK’ ‘IR LOCK’ ‘BUTTONS & IR LOCK’ ‘MEMORY LOCK‘ Center Position Display 184 185 186 187 188 RS-232C Adjustment About the RS-232C Adjustment Interface RXD TXD CTSTXD RXD RTS GND CTS TXD RXD RTS GND Combination Connection Connection methodConnect the panels as shown in the figure below Precautions when assigning IDs ID is assigned from the PC Commands IDC ID ClearID Assignment IDS ID SET 193 Normal Operation Related Commands Input Select RS-232C Adjustment MENU-SETUP related commands MENU-OPTION related commands Signal Format INTEGRATOR-PICTURE related commands INTEGRATOR-SCREEN related commandsINTEGRATOR-SETUP related commands INTEGRATOR-OPTION related commands Screen Mask 199 Other commands PIP fade in function effective 201 Quest Commands Quest Command Table Data Content Obtaining QST Status Information Data Content Size Remarks QPI Obtaining Integrator/PICTURE informationQWB Obtaining integrator/WHITE Balance information QPS Obtaining integrator/SCREEN information QSS Obtaining Setup information QSO Obtaining menu integrator/OPTION information Main screen input function Main screen size QSU obtaining the audio status QCI Obtaining time informationQAP Obtaining machine name Table of commands not compatible with PDP-505CMX COF Example 1 When the data is missing 1 Byte Example 2 When 1 Byte of data in the data is unreadableCheck Sum Examples of check sum applications Screen Burning To enjoy using your plasma display for many years Standard Functions Settings cannot be changedSetting example Setting with Menu Mode Setting with Integrator Mode Concerning frame delay lip sync Video input signal Input vertical Frame delayThese data are reference values they cannot be ensured Number Precautions Error Message RemedySelf-diagnosis Function Connection procedure Cabinet and Remote-control UnitDisconnect and Remove Hardware Maintenance Readjustment of the White BalanceScreen front protection panel Vents